Plastic Injection Molds For Auto Parts

Auto parts molds manufacture rapid quality plastic injection moulds.

Auto spare parts is the unit of the whole auto parts processing and the products serving the auto parts processing.

OEM custom mold factory plastic injection moulded products maker molding.

OEM plastic molds and parts.

Part name:Plastic Injection Molds For Auto Parts

1.Mold Life: 1,000,000 times;

2.The molds can be customized according to customer requirements;

3.Tolerance: ±0.01mm; precision, We have a mold engineer team more than 20 years of professional ;

We can supply the molds that used for Home appliance products, Electronic products, Auto parts, Medical parts, Smart home products and so on.

Precision Plastic Molds Made in China:

1.Basic Information:

Mold type: We can make the moulds is for the all tyes of plastic produts.

Mould base material: #45.LKM, LYM standard and etc.

Mould spare parts material: Jinghong, HASCO, DME and etc.

Hardness of steel: 28-50HRC.

Mould design: 3D/2D drawings

Runner: cold runner.

Design days: 1-3days.

Mould life: 500,000-3,000,000 shots.

Plastic material: PE, PC, PS, PP, PA, ABS and etc.

Injection system: Pin point gate.

2.Quality Reference:

Level A: 1,000,000 shots — high

Level B: 800,000 shots — middle

Level C: 500,000 shots — normal

3.Application:

Communication parts / Electronic parts / Auto parts / Surveillance products / Medical device / equipment and so on .

4.Customers assistance for initial detailed quotation on plastic injection molding

1) 2D/3D Design drawings offered

2) If there is no drawing, please advise the dimension/photos with dimension

3) Material information

4) Level and quantity information if possible.

What are the main plastic parts used in automobiles?

Engine accessories, water tank accessories, air conditioning accessories, air filter accessories, all kinds of kettles, dashboard accessories, seat accessories, floor accessories, roof accessories, gear bar accessories, steering wheel accessories, door interior accessories, rear-view mirror and all kinds of clips and fixings, front and rear lights, air intake grille, mudguard, reversing mirror.

What kind of engineering plastics are used in automobile plastic parts?

1,Nylon material (PA)

Nylon is mainly used in Auto engines and engine peripheral parts, the main varieties are GFPA6,GFPA66, Enhanced flame retardant PA6 and so on.

(1) Application in the peripheral parts of automobile engine: because the peripheral parts of engine are mainly heating and vibration parts, most of the materials used are glass fiber reinforced nylon. This is because nylon has better comprehensive properties. The main properties of nylon modified with glass fiber are greatly improved, such as strength, product precision, dimensional stability, etc. In addition, there are many kinds of nylon, which are easy to recycle and relatively cheap. These factors make nylon an ideal material for engine peripheral parts. Intake manifold is the most typical application of modified nylon in the automotive field. In 1990, BMW first applied the intake manifold made of glass fiber reinforced nylon to six cylinder engine. After that, the intake manifold made of glass fiber reinforced PA66 by Ford was applied to the V6 engine, and then the major automobile companies in the world followed up one after another, and the modified nylon intake manifold was widely used.

(2) Application in auto engine parts: engine cover, engine decorative cover, cylinder head cover and other parts generally use modified nylon as the preferred material. Compared with metal materials, taking cylinder head cover as an example, the weight is reduced by 50% and the cost is reduced by 30%. In addition to

engine parts, other stressed parts of the car can also use reinforced nylon, such as oil filter, wiper, radiator grille and etc.

2,Polyester material (PBT)

In the field of automobile manufacturing, PBT is widely used in the production of bumper, carburetor components, fender, spoiler, spark plug terminal board, fuel supply system parts, instrument panel, automobile igniter, accelerator and clutch pedal and other automobile parts. The competition between PBT and PA, PC, POM in automobile industry is very fierce. PA is easy to absorb water, and PC is less resistant to heat than PBT. In the aspect of automobile application, PBT will gradually replace PA because of its better water absorption resistance. In the case of high relative humidity and very humidity, the plasticity is easy to reduce due to humidity, and the electrical node is easy to cause corrosion, so the modified PBT can often be used. At 80 ℃ and 90% relative humidity, PBT can still be used normally, and the effect is very good.

3,Polyoxymethylene (POM)

Automobile industry is the biggest potential market of POM materials. POM has the advantages of light weight, high hardness, wear resistance, creep resistance and chemical corrosion resistance. It is very suitable for manufacturing automobile pump, carburetor parts, oil pipeline, power valve, top ten thousand bearing, motor gear, crank, handle, instrument panel, car window elevator device, electric switch, safety belt buckle, etc. especially for wear-resistant parts such as sliding block, The wear of these parts to metal is small, the amount of lubricating oil is reduced, and the working life of the parts are enhanced.

4,Polycarbonate material (PC)

Due to its excellent heat resistance, impact resistance, rigidity and good processing fluidity, modified PC is mainly used in exterior and interior parts, parts around instrument panel, antifreeze plate, door handle, shade plate, bracket, steering column sheath, decorative plate, air conditioning system accessories, lamp parts and other auto parts.

What are the main plastic parts used in automobiles?

Engine accessories, water tank accessories, air conditioning accessories, air filter accessories, all kinds of kettle, instrument panel accessories, seat accessories, floor accessories, roof accessories, gear lever parts, steering wheel parts, door interior parts, rear-view mirror and all kinds of clips and fixings, front and rear lights, air intake grille, mudguard and reversing mirror.

Rainbow can supply plastic and metal molds making,Injection molding ,Metal processing and product assembly to meet your customized needs.

The all plastic molds (moulds) and products plastic injection molds for auto parts and plastic parts can be customized as your required.

The Auto Parts And Molds Can Be Customized.

You are welcome for your any problem and inquiry for plastic and metal molds and products, Please contact us and send your inquires to anna.L@rainbowmold.com

1,OEM&ODM;

2,We are looking forward to an opportunity to work together with you ,Thanks!

http://www.rainbowmold.com/